Our latest innovation is born from experience, knowledge, and a commitment to continuously deliver the best. The Strummer Superdura SLR HR-800 features a width of 23 mm, more modern and wider than the previous generation wheelset. With higher stiffness, this wheelset is capable of providing more efficient power transfer for every pedal stroke.
Each wheelset is produced through a strict quality control process: from spoke tension release, alignment checks, to precise flatness and tension uniformity measurements.
This latest rim is made using T1000 high-modulus carbon material, which offers an incredibly lightweight while providing optimal stiffness. Supported by innovative geometry design and TRS technology, this wheelset offers low rolling resistance and maximum comfort in various road conditions.
This wheelset uses Strummer carbon straightpull spokes to support optimal aerodynamics and strength. The calculation process is done with 50% more precision than industry standards, with length tolerances of up to 0.5 mm, not 1 mm like most other wheelsets. This level of accuracy makes the wheelset more effective and close to perfection.
Powered by the HR-800 straightpull hub, this wheelset is lighter compared to previous generation road disc hubs. Each component is processed through high-precision CNC machines, maximizing material efficiency for the lowest possible weight. The 54T ratchet system provides quick response, enhancing performance while delivering a satisfying riding experience.
Warnings & Special Attention for Strummer Carbon Spokes! Read Before Performing Repairs or Maintenance on the Product!
The Strummer carbon Straightpull spokes use a different system from conventional spokes. In conventional spokes, tightening and loosening are done from the inner diameter side of the rims. However, for Strummer carbon spokes, tightening and loosening from the inner diameter side of the rims is strictly prohibited, as it can damage the product and endanger the safety and security of the user.
To perform the tightening and loosening of these spokes, two types of tools are required:
- 3.4 mm spoke holder – Example: Park Tool SW-22
- Internal Nipple Spoke Wrench 5.5 mm – Example: Park Tool SW-15
Steps:
- Spoke Holder: Use a 3.4 mm spoke holder to hold the protruding part of the spoke on the inner diameter side of the rims. Ensure the spoke does not move while holding.
- Tightening/Loosening: Insert a 5.5 mm hex key from the outer diameter side of the rims to tighten or loosen the spokes as needed.
Very Important:
- Always use the appropriate tools to prevent damage to the spokes and rims.
- Please pay attention to this step to maintain product durability and user safety.
Specifications of the Strummer Aeroflow Xtreme HR-700 Wheelset
Inner Width: 23 mm
Outer Width: 32 mm
Height: 35/40/50 mm (Depending on Choice)
Suitable for Use with Tires: 700c / 29"
Spoke: Strummer Carbon Straightpull, Alloy Nipple
Rims: Strummer Superdura SLR TRS 700c (T1000 Blend), 18/21H, Hooked, Clincher Tire Compatible
Hub: Strummer HR-800 Ratchet (54T) Straightpull Centerlock (Front: 12x100, Rear 12x142), 18/21H, Ceramic Bearings
Product Weight:
D35 = Front Wheelset 490 grams, Rear Wheelset 630 grams, Total 1120 grams, Estimated Tolerance +/- 20 grams
D40 = Front Wheelset 500 grams, Rear Wheelset 630 grams, Total 1130 grams, Estimated Tolerance +/- 20 grams
D50 = Front Wheelset 530 grams, Rear Wheelset 660 grams, Total 1190 grams, Estimated Tolerance +/- 20 grams
Tubeless: Can be used with Tubeless Tires.
Suitable Usage: Road Only (Asphalt), Not Recommended for Gravel.
Maximum System Weight (Bicycle Weight + Luggage Weight + Rider Weight): 120 kg (If the system weight exceeds 100 kg, regular checks need to be performed by a competent mechanic)
Tire Size Recommendations
The following are recommendations for tire sizes suitable for this wheelset. The information below needs to be adjusted according to the specifications from the tire manufacturer. The tires used must meet the specifications of the wheelset and tire manufacturer to ensure that the combination is safe to use.
Usable Tire Width: Minimum 28 mm, Maximum 32 mm
Tire Pressure Recommendations
Do not exceed the maximum tire pressure written on the tire or the information below. The specifications below are the absolute maximum limits. Product deformation may occur when approaching the maximum limit.
The air pressure used must meet the specifications of the wheelset and tire manufacturer to ensure that the combination is safe to use. The air pressure must follow the system weight conditions (weight of person + weight of bike + weight of luggage).
Tire Width (mm, inch) & Maximum Air Pressure (bar, psi):
28 - 29 mm / 1 - 1.1 inch = 7 bar / 102 psi
30 - 32 mm / 1.2 - 1.3 inch = 5.75 bar / 83 psi
Specifications & Size of Replacement Spokes
The purchase of this wheelset does not include spare spokes. Spare spokes are sold separately.
Brand & Type of Spoke: Strummer Carbon Straightpull
Superdura SLR HR-800 (35 mm)
Front Wheelset: 12 Pcs Left 291 mm (Disc Brake Side), 6 Pcs Right 277 mm
Rear Wheelset: 14 Pcs Right 292.5 mm (Drive Side), 7 Pcs Left 273.5 mm (Disc Brake Side)
Superdura SLR HR-800 (40 mm)
Front Wheelset: 12 Pcs Left 286 mm (Disc Brake Side), 6 Pcs Right 272 mm
Rear Wheelset: 14 Pcs Right 287.5 mm (Drive Side), 7 Pcs Left 268.5 mm (Disc Brake Side)
Superdura SLR HR-800 (50 mm)
Front Wheelset: 12 Pcs Left 276 mm (Disc Brake Side), 6 Pcs Right 262 mm
Rear Wheelset: 14 Pcs Right 277.5 mm (Drive Side), 7 Pcs Left 258.5 mm (Disc Brake Side)
Compatible Spare Parts & Adapters
Front Hub Bearing: 6803-2RS Hybrid Ceramic (2 Pcs)
Rear Hub Bearing: 15267-2RS Hybrid Ceramic (2 Pcs), Freehub Body 6802-2RS Hybrid Ceramic (2 Pcs)
Product Warranty
Warranty Duration: 6 Months From the Date of Product Purchase
Warranty Coverage: Manufacturing defects in the product
Not Covered by Warranty: Parts that are subject to wear and tear (Example: Bearing, Ratchet, Grease, or others), cosmetic damage from use, damage due to accidents or excessive impact
Warranty Void If: There are modifications outside specifications, use not in accordance with the intended purpose, or other errors in use/service.
Check the Complete Terms at: https://strummerbikes.com/pages/warranty-information-indonesia
Interested in Our Products?
We do not offer online sales of our products. Please contact the nearest dealer/reseller to obtain our products.
Click here to find the nearest dealer location in your city. Our dealers also sell our products through several online marketplaces in Indonesia such as Bukalapak, Shopee, and Tokopedia.
We are in the process of looking for dealers/distributors outside the area of Indonesia. Contact us if you are interested in becoming our dealer/distributor.
For buyers in countries that are part of the ASEAN (Association of Southeast Asian Nations) organization and the ASIA region, you may also be able to purchase our products through Shopee. Here are the countries accessible through Shopee:
Shopee Malaysia
Shopee Philippines
Shopee Singapore
Shopee Thailand
Shopee Vietnam: Based on the check on January 18, 2025, our products are not yet available on Shopee Vietnam. You can use our website to obtain our products.
Shopee Taiwan
The stock of goods on Shopee International may not be complete. If the item you are looking for is not available, we recommend you purchase through our website.
You may need to pay taxes/import duties in your respective countries. The value of the import duties and taxes will depend on the regulations and rules in each buyer's country.
We reserve the right to change the delivery courier without prior notice if there are issues with the courier selected at checkout.
Some buyers experience issues during the payment process. You need to contact your bank to inform them that the transaction you are making is legitimate and not a fraud. This failure occurs because your credit card detects that our website is outside your country's area, thus blocking the transaction. After informing the bank, the transaction can usually be completed.
Don't hesitate to contact us for more information, we will do our best to fulfill your order.
Where can I purchase this?
You can get our products through our network of dealers and resellers. To find the nearest store in your city or town, simply click the link provided below.
Pay Attention to the Details
We obsessively focus on the details. Improving by the millimeter. Adding the stiffness of our hubs by widening the flange of our hubs, thus increasing wheelset stability and strength.
