Technology and Innovation

Center Alignment Design (CAD)
With Strummer Center Alignment Design (CAD), our headsets and bottom brackets meet cyclists' needs.
The Strummer bottom bracket with CAD improves stiffness and pedaling efficiency by balancing the left and right sides of the BB. It also helps compensate for frames that are not manufactured perfectly.
The Strummer headset improves bike performance by eliminating unnecessary clamping on the fork axle without compromising performance.
 
 
Tubeless Straight Side (TSS) logo
Tubeless Straight Side (TSS)
Also commonly known as hookless, this rim has a shape specifically designed for tubeless use. It cannot be used with clincher tires. Tubeless Straight Side (TSS) is an evolution of the earlier Tubeless Ready System (TRS).
Rims with this technology are lighter, produce a rounder tire profile when fitted (giving them better riding characteristics), and have greater volume at the same outer width (which allows for lower tire pressure, better grip, and increased comfort).
 
 
Tubeless Ready System (TRS) logo
Tubeless Ready System (TRS)
This is a rim commonly referred to as "Tubeless." Its advantage is the flexibility it offers cyclists. This rim can be set up tubeless by fitting the bike with suitable tubeless rim tape.
If you don't want to use tubeless tires, you can also use clincher tires. One advantage of a tubeless system is lower rolling resistance.
 
 
Integrated Cable Routing (ICR) logo
Integrated Cable Routing (ICR)
A system for organizing cables, improving the neatness and aerodynamics of the bike. The Strummer ICR headset lets you convert a bike with external cable routing to internal routing. The Strummer ICR headset also prevents water from entering the system using rubber seals in strategic areas.
 
 
Offset Spoke Hole (OSH) Logo
Offset Spoke Hole (OSH)
Strummer rims with offset spoke holes (not centered) increase the strength of the assembled wheelset. The spoke angles and tension on the left and right sides of the wheelset can be distributed more evenly.
Product example: Strummer XC-30
 
 
Hidden Fork Riser (HFR) Logo
Hidden Fork Riser (HFR)
A solution for a bicycle fork steerer tube that has been cut too short. The Strummer HFR system allows cyclists to safely raise the stem mounting position. This fork riser can be safely installed on carbon, aluminum, and steel forks.
 
 
Ultra Light Logo with feather illustration
Ultralight Technology
The Strummer sprocket with Ultralight technology uses AL7075-T6 material for the large cog to significantly reduce weight. Steel is still used for the small cogs to provide strength at frequently used ratios.
  
SuperDura Logo
Superdura Technology
The Strummer Superdura sprocket is the best sprocket we can make at this time. It uses modern technology and materials, with further CNC machining. The materials used are stronger to support this process. The result is a component that is lighter & stronger than the Strummer ultralight cassette sprocket.
 
  
T700 and T800 Mix Blend Logo
T700 & T800 Blend
The Strummer Aeroflow Extreme carbon rim uses a blend of T700 & T800 to achieve greater stiffness & strength.
 
 
Transparent Polymer System (TPS)
Integrated Spring Ratchet (ISR)
Shock Absorbing Technology (SAT)
Durable Gel Material (DGM)