Official replacement parts for repairing the freehub body on worn or damaged Strummer hubs. Restore your hub's optimal functionality by using precise original components.
⚠️ IMPORTANT WARNING (READ BEFORE PURCHASING)
This component is designed to highly specific specifications. To avoid transaction errors:
-
For Strummer Hubs Only: This product is NOT COMPATIBLE with hubs from brands other than Strummer.
-
For Specific Types Only: This product is NOT COMPATIBLE with other Strummer hub series outside the compatibility list below.
-
Sprocket Standard: Only for HG MTB Sprockets. Not compatible with or safe for the HG Road standard.
-
Check Hub Generation: Make sure your hub is Gen-1 (MTB rear hub with a pawl width of +/- 5.5 mm).
Hub Compatibility List (Gen-1 Series Only)
This replacement part can only be used with the following Strummer hub models:
-
HM-280 (Gen-1)
-
HM-350 / HM-350 Boost (Gen-1)
-
HM-380 / HM-380 Boost (Gen-1)
-
HM-650 / HM-650 Boost (Gen-1)
Technical Specifications & Included Items
Manufactured according to the manufacturer's standard specifications to ensure easy installation (plug and play).
-
Material: AL7075-T6 Aluminum Alloy (High Strength).
-
Mechanism: 6 Pawls with 3 Teeth.
-
Compatibility: HG MTB Sprockets with 8, 9, 10, 11, 12, and up to 13 speeds.
-
Inner Spacer: 10.56 mm.
Package Contents:
-
1x Strummer Freehub Body
-
1x 10x135 mm End Cap (Drive Side)
-
1x 12x142 mm End Cap (Drive Side)
-
1x 10.56 mm Inner Spacer
Repair Tips
Be sure to clean the drive ring area inside the hub before installing the new freehub body. Use hub-specific grease to ensure the pawl mechanism operates smoothly and lasts.
Replacement Bearings
Yes, Gen-1 6-Pawl HG MTB freehub bearings can be purchased separately. Match the code and dimensions of the old bearings, as well as the freehub model/generation, before choosing a replacement.
