Wheelset: Strummer HR-360 with Strummer Aeroflow Pro Carbon D40 (700c, TRS)
Last Modified on: October 9, 2024
Tips: If you are using a mobile phone/smartphone, use landscape mode to make it more comfortable to read the table below. The best experience reading the table below is with a computer/laptop/tablet.
Below are the spoke sizes for the hub and rim combinations below:
Hub & Freehub Variants:
Strummer HR-360 Ratchet (Gen-1) 24/24H (12x100/12x142)
Strummer HR-360 4-Pawl (Gen-1) 24/24H (12x100/12x142)
Rims Variants:
Strummer Aeroflow Pro D40 (35 mm, 700c, TRS)
Assembly Recommendations: 2 Cross on Front & Rear Wheelset to get maximum wheelset strength.
| Front Hub | Left Spoke (Disc Brake) | Right Spoke | L/R Tension |
| 0 Cross (Radial) | 259mm | 261mm | 58% |
| 1 Cross | 262mm | 264 mm | |
| 2 Cross (Recommendation) | 271mm | 272mm | |
| 3 Cross | 282mm | 284 mm | 58% |
| Rear Hub | Left Spoke (Disc Brake) | Right Spoke (Freehub Body) | R/L Tension |
| 0 Cross (Radial) | 258mm | 256mm | 57% |
| 1 Cross | 261mm | 260 mm | |
| 2 Cross (Recommendation) | 271mm | 269mm | |
| 3 Cross | 283mm | 282mm | 57% |
Warning: This guide is created to help determine the correct spoke size when assembling a Strummer wheelset. This guide can be used as a reference, but it is important to remember that there is a possibility of inaccurate information due to changes in product sizes/specifications, or user error when inputting data.
Note: This guide is intended to provide general information and should not be used as the sole reference for determining spoke sizes. There may be a reasonable difference/tolerance in spoke sizes of +/- 1 mm depending on the brand and type of nipple used during ERD measurements or wheelset assembly. Differences may also arise from the process of rounding numbers from the results that appear during calculations.It is recommended to perform measurements and recalculations before assembly (using the brand and type of spokes & nipples that will be used in the wheelset assembly process). It is recommended to consult a professional bicycle mechanic or manufacturer's specifications before assembling the wheelset. Using the wrong spoke size can be dangerous safety and wheel structure failure. Always take proper precautions and follow the manufacturer's guidelines to ensure the safety of yourself and others when working on your bike.
