Wheelbuilding: Strummer HR-100 with Strummer Falcon30 TRS 20/24 Holes
Tips: If you are using a mobile phone/smartphone, use landscape mode to make it more comfortable to read the table below. The best experience reading the table below is with a computer/laptop/tablet.
Below are the spoke sizes for the hub and rim combinations below:
Hub & Freehub Variants: HR-100 Strummer 6-Pawls Hub Set (20/24H Front & Rear)
Rims Variants: Strummer Falcon30 (20/24H)
Front Hub | Left Spoke | Right Spoke | L/R Tension |
0 Cross (Radial) | 274mm | 274mm | 100% |
1 Cross | 278mm | 278mm | 100% |
2 Cross | 286mm | 286 mm | 100% |
3 Cross | 296mm | 296mm | 100% |
Rear Hub | Left Spoke | Right Spoke | R/L Tension |
0 Cross (Radial) | 271mm | 261mm | 43% |
1 Cross | 273mm | 265mm | 43% |
2 Cross | 281mm | 276 mm | 43% |
3 Cross | 292mm | 290mm | 43% |
Wheelset Assembly Recommendations: We recommend using 0/2 cross for the front wheelset and 2 cross for the rear wheelset.
Warning: This guide is created to help determine the correct spoke size when assembling a Strummer wheelset. This guide can be used as a reference, but it is important to remember that there is a possibility of inaccurate information due to changes in product sizes/specifications, or user error when inputting data.
Caution: This guide is intended to provide general information and should not be used as the sole reference for determining spoke sizes. There may be a reasonable difference/tolerance in spoke sizes of +/- 1 mm depending on the brand and type of nipple used during ERD measurements or wheelset assembly. Differences may also arise from the rounding process of the numbers that appear during calculations. It is recommended to re-measure and re-calculate before assembly (using the brand and type of spokes & nipples that will be used in the wheelset assembly process). It is recommended to consult a professional bicycle mechanic or manufacturer's specifications before assembling a wheelset. Using the wrong spoke size can be dangerous safety and wheel structure failure. Always take proper precautions and follow the manufacturer's guidelines to ensure the safety of yourself and others when working on your bike.