Wheelbuilding: Strummer HR-10 Ratchet with Falcon30 TRS 700c (20/24H)

Tips: If you are using a mobile phone/smartphone, use landscape mode to make it more comfortable to read the table below. The best experience reading the table below is with a computer/laptop/tablet.

Below are the spoke sizes for the hub and rim combinations below:

Hub(s) Type: Strummer HR-10 Ratchet (9x100/10x130, 20/24H)

Rim(s) Type: Strummer Falcon30 Rim Brake CNC (20/24H)

Front Hub Left Spoke Right Spoke L/R Tension
Radial (Recommended) 274mm 274 mm 100%
1 Cross (Recommended) 278mm 278mm
100%
2 Cross 286 mm 286 mm
100%
3 Cross 296mm 296mm
100 %
Rear Hub Left Spoke Right Spoke R/L Tension
Radial 272mm 264 mm 44%
1 Cross 274 mm 268mm
44%
2 Cross (Recommended) 282mm 277mm
43%
3 Cross 291mm 290mm
43%

Warning: This guide is designed to help determine the correct spoke sizes when building a Strummer wheelset. It can be used as a reference, but it is important to remember that there is a possibility of inaccuracy in the information due to changes in product sizes/specifications, or user error when inputting data.

Caution: This guide is intended to provide general information and should not be used as the sole reference for determining spoke sizes. There may be a reasonable difference/tolerance in spoke sizes of +/- 1 mm depending on the brand and type of nipple used during ERD measurements or wheelset assembly. Differences may also arise from the rounding process of the numbers that appear during calculations. It is recommended to re-measure and re-calculate before assembly (using the brand and type of spokes & nipples that will be used in the wheelset assembly process). It is recommended to consult a professional bicycle mechanic or manufacturer specifications before assembling a wheelset. Using the wrong spoke size can compromise the safety and structural failure of the wheel. Always take proper precautions and follow the manufacturer's guidelines to ensure the safety of yourself and others when working on your bike.